COB LED Strip Light

Sunled-lighting Flexible COB LED Strip Light series creates a seamless line of light from start to finish. The all-new strip design uses flip-chip LEDs to eliminate visible LED dots (hot spots). The all-new chip-on-board technology not only improves light quality but also improves the thermal management and flexibility of the strip. The smaller LEDs can be packed tighter and weigh much less than the bulkier 5050 LEDs, creating a strip that can work around the needs of your application. The spotless output makes the COB LED strips ideal for narrow applications like display cases and backlighting, or where reflective surfaces such as granite and tile are used.

Colors

Sunled-lighting COB LED strips are offered in: Red, Green, Blue, Ice blue Warm White 3000K, Neutral White 4000K & Cool White 6000K.

cob led strip light.jpg

Custom Lengths

Unlike most suppliers, Sunled-lighting offer COB LED strip lights in smaller 5m 50m 100m in roll. Some applications might need a shorter section of strips which is why the LED strips can be cut every few inches. You can cut the strip along the cut marks which feature a thin black line running over solder pads.

Power

The strips need 12VDC input. This requires either a battery or 12V Power Supply. The strips run at roughly 7 W/M. Please make sure you have enough wattage when running your specified length. The below wattage chart has accurate wattage calculations for each length shown.

Adjustable Lighting

cob led strip lights are fully dimmable and can be used with 12V PWM dimmers. The dimmer will go between your power supply and strips. Find compatible controllers below in the PWM Dimmers section.

If you require an AC Dimming Control from Lutron or Leviton, use a LED driver switch.